The HUBER Q-PRESS® allows for thickening and dewatering to occur in a single machine!
This allows for cost effective dewatering of thin sludges with solids concentrations as low as 0.5% (5,000 mg/l). Typical dewatering results are in the range of 18 -25% which means a sludge volume reduction of > 96 % in a single step.
The secret is in the design of the wedge wire basket having three treatment zones, with optimally adjusted bar spacings, combined with a tapered screw which gradually imparts increasing pressure on the sludge as it moves towards the discharge.
The free water is quickly removed by the pressure of the feed pump over a large free filter surface area. A pressure probe in the feed area controls the pressure thus ensuring a constantly high filtrate quality.
The volume of material between the screw flights is reduced by the conical screw and the sludge is pressed against the inner screen surface to release water from the sludge, with a continuous reduction of the filter cake thickness.
The residual water remaining in the sludge is finally pressed out by the pneumatic counterpressure cone at the discharge. The dewatered sludge is pushed by the conveying screw against the pressure cone into the discharge chamber.
About the Hydroflux Group
The Hydroflux Group comprises eleven companies based in Australia, New Zealand, Fiji and the UK, providing design and build, equipment, processes and operational services in water and wastewater treatment. Hydroflux Epco specialises in municipal wastewater and sludge treatment, is the exclusive Australian representative for HUBER Technology, AEROSTRIP, CNP Technologies, Flootech MBBR, Organica Water and incorporates EPCO Australia.
Hydroflux Epco Pty Ltd is a member of the Hydroflux Group.
Hydroflux Epco Pty Ltd
Level 26, 44 Market St. Sydney NSW 2000 Australia
P +61 2 9089 8833 F +61 2 9089 8830